Short: Internet TCP/IP stack (GTLayout module)Author: kruse@nordicglobal.comUploader: kruse@nordicglobal.comVersion: 3.0dType: comm/tcpRequires: OS 2.04 or higherReplaces: comm/tcp/Miami30GTL.lhaThis archive contains the GTLayout user interfacemodule for Miami 3.0d. Miami is an easy-to-use TCP/IPstack for Internet access or access to local networks,complete with dialer, PPP, (C)SLIP andauto-configuration tools. You will also need otherarchives -- see below.Miami can be used with modems, ISDN boards, ISDNterminal adapters, cable modems, or network boards(Ethernet/Arcnet).AmiTCP/IP, ppp.device or cslip.device are NOTneeded for Miami.Minimum requirements: - Any Amiga with Kick/WB2.04 or higher - recommended: MUI 3.8 or higherMiami 3.0d is distributed across five archives: one mainarchive, two archives with program binaries, and twoarchives with GUI modules. - Miami30d-main.lha: Main archive. *Everybody* needs to download this archive. - Miami30d-000.lha: Program binary for 68000/010 CPUs. - Miami30d-020.lha: Program binary for 68020/030/040/060 CPUs. - Miami30d-MUI.lha: MUI user interface module for Miami. Requires MUI 3.8 or higher. - Miami30d-GTL.lha: GTLayout/GadTools user interface module for Miami.You need to download the following archives: - The main archive - ONE of the program binary archives (000/010 OR 020/030/040/060) - AT LEAST ONE of the user interface modules (MUI or GTLayout or both)Holger Krusekruse@nordicglobal.com
